Sale !

Power Rust Stop – Water Based DTM

$289.99-$289.99$321.99-$321.99

Use Power Rust Stop to inhibit rust on ferrous metal, galvanized metal, and other surfaces exposed to general industrial and atmospheric conditions. Power Rust Stop boasts excellent resistance to water, most alkalies, detergents and mild acids, and does not contain the flammable solvents found in other rust-inhibiting paints.

Clear
5493-5

Description

Features

  • Stops flash rusting before it starts
  • Fast drying formula
  • Does not contain flammable solvents
  • Excellent resistance to most alkalis
  • 100% acrylic latex direct-to-metal (DTM) coating

How to Use

SURFACE PREPARATION

Carefully clean up with a wet mop or HEPA vacuum. Remove all oil, grease, dirt, loose or scaling paint, rust, mil scale and other foreign matter.

FERROUS METAL

Industrial structures, tank exteriors, structural steel, etc., should be “commercial” blast cleaned (SSPC-SP6) or power tool cleaned (SSPC-SP3) as an alternative.

GALVANIZED METAL, ALUMINUM

Surface oil should be wiped off with mineral spirits and a clean rag.

PREVIOUSLY PAINTED SURFACES

Prepare ruptured or scratched surfaces as for unfinished metal.  Spot prime bare ferrous metal as conditions dictate.

APPLICATION INFORMATION

Thinning:  Material is supplied at application consistency but can be thinned sparingly with water if necessary to improve application characteristics.

APPLICATION TOOLS

Power Rust Stop can be applied by roller, brush or airless spray.

TOOLS

  • Brush: Nylon or polyester synthetic bristle
  • Roller:  Synthetic fiber 3/8” or longer
  • Spray Settings:  Pressure: 2300-2800 P.S.I. Tips: .017 to .021 tips

COVERAGE

  • Depends on thickness and porosity of the material
  • Smooth Surfaces: 400-500 sq. ft./gal.
  • Porous Surfaces: 100-300 sq. ft./gal.

DRYING TIME

  • @ 70°F 50% R.H
  • To Touch: 1 hour
  • Recoat with Power Rust Stop: 4 hours
  • Recoat with other water-based coatings: 8 hours
  • Full Cure:  10 days

PRECAUTIONS

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Surface and air temperature must be 50°F or above during application and drying time. Do not re-coat with coatings using aromatic or other strong solvents.  Do not intermix with solvent base primers or finishes. Do not use Power Rust Stop when rain is imminent or when the dew point is above 60 percent. Power Rust Stop is not designed for tank interiors or for immersion service. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.

 

Safety & Technical Data Sheets

Additional information

size

5G

Reviews

There are no reviews yet.

Be the first to review “Power Rust Stop – Water Based DTM”

Your email address will not be published. Required fields are marked *

Unlock VIP DealsSave up to 70% with exclusive VIP offers!

Get exclusive deal alerts by signing up to our VIP list. 

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the compare bar
Compare
Wishlist 0
Open wishlist page Continue shopping